Tradition obliges
Already since 1959, the Octavia range has represented a milestone in the more than 127-year history of Škoda. An even more practical version, the Octavia Combi, with a spacious and variable “combination body” offering both the advantages of passenger and light commercial vehicles, was launched on 11 September 1960. With a length of just 4065 mm, a width of 1600 mm and a height of 1430 mm, the Škoda Octavia Combi could carry 690 liters of luggage in addition to five passengers, and up to 1050 liters when occupying two seats. There was also a sleeper arrangement and a number of other practical equipment features. Between 1961 and 1971, 54,100 of these cars left the Kvasiny plant. As a basis for the Octavia, Škoda used the traditional concept with a backbone chassis frame and a front-mounted four-cylinder petrol engine driving the rear wheels. The robust construction combined with a ground clearance of 175 mm has proven itself even in demanding operating conditions.

Modern career
Another and even more successful chapter began in 1992, shortly after the integration of the Czech car manufacturer into the Volkswagen Group. The newly developed Octavia was the first Škoda based on the Group’s A4 chassis platform and the design team led by Dirk van Braeckel was already working in a digital CAD environment. The production of the Škoda Octavia, initially with a liftback body, began in September 1996 in a completely new assembly hall of the Mladá Boleslav plant, one of the most modern in Europe. From September 1997 onwards, about 200 units of the new Octavia Combi were produced as part of the pre-production. The so-called zero series had not yet been delivered to customers. Production started in February shortly before the official world premiere on Tuesday 3 March 1998 at the prestigious Geneva International Motor Show. The first buyers took delivery already in May 1998. The four-and-a-half-meter wagon had a wheelbase of 2512 mm, was six millimeters longer and 26 mm taller than the liftback. The 548 to 1,512 liters of luggage space was among the largest in the class.

The timeless elegance of the bodywork scored with experts and customers alike, as evidenced by the Czech National Design Award (1999) – but mainly by sales statistics. In 1998, the Combi version accounted for 15 percent of sales of the Octavia model range. In 2001 the percentage had already gone up to 40.5 percent. During its 13-year career, 470,600 cars were built.

A video provides period footage of the first modern generation of the Octavia Combi at Škoda Storyboard.

Growing popularity
From summer 2004, the second generation of the Octavia Combi was produced alongside the first modern generation (internally called A4). The purposeful coexistence lasted for six years, as the two cars complemented each other perfectly on the market. The modern shapes of the succeeding Octavia A5 were designed by a team of designers led by Thomas Ingenlath. By 2013, 881,200 customers had opted for the estate, accounting for 33% of global Octavia sales.

The third Octavia Combi (A7), launched on 7 March 2013, was even more successful. The range has gradually expanded to include an Octavia Scout, an outdoor version with an advanced 4×4 drive, automatic transmissions and many other modern features. Between 2012 and 2020, 1,195,500 units of the third generation of the Octavia Combi left the Škoda production plants.

Fourth generation: electrification
Launched in November 2019, the fourth generation is Skoda’s first-ever series production model with mild-hybrid e-TEC technology. For the first time ever, Škoda is also offering a plug-in-hybrid Octavia Combi iV which is available in the sporty Octavia Combi RS iV too. The fourth modern generation of the brand’s bestseller surpassed the quarter of a million units delivered to customers. The Škoda Octavia Combi thus reached more than 2.8 million customers in total over the past quarter of a century.

From March 1 to May 17, the story of the Octavia will be recalled by an exhibition at the Škoda Museum in Mladá Boleslav.

Article source: www.skoda-storyboard.com

“At Škoda Auto we are committed to predictive maintenance as a means to ensure that our production equipment is always in perfect shape. An AI system constantly checks the current process status against the optimal baseline conditions. It’s taught to identify certain patterns, constantly adding to its knowledge base and recognising changes immediately. This enables us to react promptly, optimises the efficiency of our processes and ensures the best possible utilisation of our production capacities.”

Miroslav Stejskal, Predictive Maintenance Coordinator, Škoda Auto Central Technical Service

Cameras on the assembly line’s overhead conveyor
The images of equipment and parts subject to wear, such as girders, bolts or cabling, are captured by cameras on the overhead conveyor of the assembly line. As soon as the AI-based computer connected to the camera detects irregularities in the process, or a need for maintenance actions, it flags them in real time.

Continuous checks enable early detection of required maintenance measures
“Magic Eye” instantly compares its high-precision photographs against thousands of stored images. This enables it to detect departures from the optimal baseline conditions and to identify sources of error. The use of blue light ensures that the AI tool reliably differentiates between cracks and scratches and makes the correct diagnoses. In addition, the system continuously expands its knowledge base. If it finds a worn bolt, for example, it marks the spot as error-free as soon as the part has been replaced and checked again. To evaluate detected deviations, the system uses information on irregularities it has identified in the past.

Current use on the assembly line for the Enyaq iV and Octavia models
Škoda is using “Magic Eye” at its main plant in Mladá Boleslav, on the assembly line for the Enyaq iV and Octavia models. This makes Škoda Auto one of the first companies in the Czech Republic to use the possibilities of AI‑supported predictive maintenance.

To enable further optimisation of the system and accelerate wider integration at the Mladá Boleslav and Kvasiny sites, the FabLab has simulated a section of the assembly line. This “implementation arena” can be used to experiment with different camera settings, configure system parameters and simulate damage to the assembly line.

Article source: www.skoda-storyboard.com

29 vocational students at the Škoda Academy have already started working on their Student Car. Since the 2013/14 academic year, apprentices have created their very own dream car with the expert guidance of their instructors – from a blank page to the finished one-of-a-kind vehicle. Throughout the project, they receive support from many Škoda Auto departments, including Škoda Design and Technical Development. Details on the ninth Student Car, such as the vehicle it is based on, the name and the type of conversion will be revealed within the next few months.

Maren Gräf, Škoda Auto Board Member for People & Culture, says: “The Student Car project has been an integral part of the training at the Škoda Academy for nine years now. The tremendous team spirit, the enthusiasm of our talented young apprentices and their attention to detail never fail to impress me. During the project, they acquire practical experience at every stage of development. They also gain expertise and insights into many different departments at the company. I am very much looking forward to seeing Student Car number nine and wish everyone involved lots of fun and success working on this great project.”

Maren Kabowski-Ciecior, Head of the Škoda Academy, says: “With great anticipation, I am closely following our students and the development of the ninth Student Car. This project gives our talented apprentices the opportunity to apply everything they have learned in previous years. At the same time, it lays the groundwork for a promising career at Škoda Auto and introduces students to the wide range of possible positions at our company. Our students can discover new areas of interest and make an initial decision on where they would like to work and contribute their talents.”

Early Student Car forerunners in 1975
So far, students from the Škoda Vocational School have designed and built eight Škoda Student Cars under the supervision of their instructors. More information on the previous Škoda Student Cars can be found here. The eighth Student Car, the Škoda Afriq, was supported by Škoda Motorsport for the first time. Early forerunners of the innovative project – the only one of its kind in the Czech Republic – were four units of the Škoda Buggy Type 736, hand-built in 1975 by Škoda vocational students for the emerging autocross scene in former Czechoslovakia.

Article source: www.skoda-storyboard.com

The tradition of the Mladá Boleslav-based company dates back to 1895 when the passionate cyclists and Czech compatriots Václav Laurin and Václav Klement laid the foundations of the Slavia bicycle workshop. From 1899, they also produced modern motorcycles of their own design and in the autumn of 1905, the first Laurin & Klement automobile, the Voiturette A, attracted the attention of the general public.

Owing to its international success, the L&K (Laurin & Klement) brand quickly grew to become the largest car manufacturer in what was then Austria-Hungary and later Czechoslovakia. The Mladá Boleslav carmaker has used the Škoda logo with a winged arrow since the autumn of 1925 when it merged with a strong strategic partner – the Pilsen-based engineering group Škoda. The trademark was registered 100 years ago this year, on 15 December 1923.

There are many other important Škoda Auto anniversaries coming up in 2023, for example, the 110th anniversary of the Laurin & Klement M models, which paved the way for the Škoda Superb. In addition, the carmaker will be celebrating 80 years of Škoda all-wheel drive cars.

A complete overview can be found in the attached brochure. Škoda Auto will be highlighting selected anniversaries in separate press releases.

Article source: www.skoda-storyboard.com